5
Wall Tamper
Conduit Entry
Wall Tamper
Lid Tamper
Piezo Cable Feed
High Voltage Area
(when product is sounding)
PCB Screw
Loosen Screw
Push to Learn
PCB Screw
Lid Tamper
LED 4
Push to Learn
LED 1
LED 2
LED 3
Com
BELL
D
STB
E
TMP FED
TR
C
0V
B
+12V
A
I/02
I/01
Piezo Plug
Piezo Lead
Piezo Plug
JP3. Tamper Feed = 0V
JP3
LEARN
STB
TMP
FED
E
TMP .FED=0V
JP4
PCB and Connections
3
Orisec
Control Panel
or Zone
Expander
Network
Conections
+
+
INT-CS
Internal
Compact
Sounder
Network Connection
For full functionality connect the INT-CS to the
Network Connections on an Orisec alarm system.
Conventional Connection
The INT-CS can operate as a simple conventional sounder and
strobe when connected to other manufacturers’ control panels.
*These sounds could be used to indicate eg I/O1 “School Lockdown”
and I/O2 “Lesson Changeover”.
I/O1 has priority over I/O2. These notifications operate only when used in
conventional stand-alone mode (ie not connected via the network or W-AP).
Ensure JP3 is NOT fitted.
Terminal Connect to Control Panel
I/01
Slow Sweep and/or RED LED* (0V applied)
COM
Common/0V for IO/1 and I/02
I/02
‘Beep-beep-beep’ and/or GREEN LED* (0V applied)
12V
A
+12V supply
0V
B
0V supply
TR
C
Tamper return
BELL
D
Sounder trigger 0V applied
STB
E
Strobe trigger 0V applied
TMP FED
Tamper Feed
