background image

Standards

Security

PD 6662:2017 
EN 50131-1:2006+A3:2020 
EN 50131-4:2019 Type: Remotely Powered, Sweeping Tone 
Grade 2, Class II

EMC

Conforms to European Union (EU) Electro-Magnetic Compatibility (EMC) Directive 2014/30/EU 
and EN 50130-4:2011+A1:2014
EMC Environment: Residential / Commercial / Light Industrial / Industrial

WEEE Directive: 2012/19/EU Compliant: This symbol indicates that according to local laws and regulations, 
this product should not be disposed of as municipal/household waste. Instead, it should be disposed of 
at the appropriate collection points designated for the recycling of electrical and electronic equipment, 
or returned to Orisec upon purchase of new replacement products. This will help to conserve natural 
resources and ensure that it is recycled in a manner that protects human health and the environment.

RoHS Directive: 2011/65/EU Compliant:  
Orisec declares that this product complies with and conforms to RoHS legislation that it does 
not contain more than the agreed levels of: Lead (Pb), Cadmium (Cd), Mercury (Hg), Hexavalent 
chromium (Cr6+), Polybrominated biphenyls (PBB), Polybrominated diphenyl ethers (PBDE)

Manufacturer: Orisec Ltd, 1 St Crispin Way, Haslingden, Lancashire. BB4 4PW. United Kingdom.

Warranty

The INT-CS is guaranteed against defects in material or faulty workmanship for a period of 2 
years from the date of purchase.
Disclaimer: Orisec will not accept any liability based on a claim that the INT-CS failed to 
perform correctly as it is a component part of an installation and not a complete intruder alarm 
system. 

Summary of Contents for INT-CS













Reviews: