Orion TV20RN10D Operating Instructions Manual Download

Page: 45 / 48

Connection to other equipment

3. Connecting an audio system

You can supply the TV sound to the stereo equipment (A) with the scart socket. Use a special scart cable

for the connection which sold at the accessory shop. (please consult your hi-fi instructions for details).

If you have a surround sound amplifier/decoder (B) with a coaxial digital input, you can connect the

Coaxial Digital Audio Output to it, using a suitable coaxial digital lead. This connection carries the audio

signal from this set’s Digital channels only.

Notes:

The Bass/Treble/Balance adjustments (see

P.21) only function with the sound from the TV

speakers - it does not affect the audio output

sockets.

Many TV broadcasts are transmitted with

surround sound (e.g. Dolby Surround) as well

as stereo. If you connect the Variable Audio

Output sockets to a suitable surround sound

amplifier system, it will be able to decode the

surround information from the stereo signal

output from the TV.

•

(A)

(B)

TV (Left side view)

Stereo amplifier

Audio input

(Coaxial digital lead, not supplied)

Surround sound amplifier system

COAXIAL

AUDIO OUT

(Scart-RCA cable, not supplied)

Video camera

to AV2

Playback

TV (Left side view)

Video recorder

to AV1

Recording

(AV cable, not supplied)

(SCART cable, not supplied)

(S-VIDEO cable, not supplied)

AV output

4. Connecting Video camera and Video recorder

Select the “MONITOR” option in the SETUP menu (see No.5 on page 46).

Select the AV2 input mode (see P.12). You can see the playback picture from video camera.

This signal is output via AV1 and can be recorded by video recorder.

With this arrangement, Video recorder

will record exactly what is shown on the

screen.

Notes:

• If you have a camcorder with S-video,

use an S-video cable instead of a

standard video cable. Do not connect

both a standard video cable and an

S-video cable at the same time, or the

picture performance will be unaccept

able.

• When you input the PAL-M signal to

AV2 input, select AV COLOUR setting

to AUTO, otherwise the monochrome

images will be displayed.

32W0346A_ENG.indd 45

5/28/07 9:40:33 AM

Summary of Contents for TV20RN10D

















































Search results

Summary of Contents for TV20RN10D

Reviews:

Related manuals for TV20RN10D

Brands by name

Popular brands

Orion TV20RN10D, Operating Instructions Manual

Search results

Summary of Contents for TV20RN10D

Reviews:

Related manuals for TV20RN10D

Brands by name

Popular brands