background image

37

Password Setup (Parental lock)

1

Press 

DIGITAL MENU

, the menu will appear on the screen. 

Press   or   to select System Configuration option.

Press 

 or 

 to select ‘Password Setup’ from sub menu 

tab, then press 

ENTER

.

Password Setup

Display Setup

Main menu

System Configuration

A C

B

A C

B

2

‘Enter Password’ will appear. Press ‘

0 0 0 0

’ using the 

Number Buttons

. (This is the default password.) 

Enter Password

– – – –

3

Press 

 or 

 to select ‘Parental Lock’, then press   or 

 to select desired parental rating (see note). Then press 

EXIT

 to return to the normal screen.

Password Setup

Parental Lock

None

Change password

– – – –

Navigate

Enter

Exit

4

You can also change the password using the next option.

Press 

 or 

 to select ‘Change password’.

Password Setup

Parental Lock

8

Change password

– – – –

Navigate

Enter

Exit

0..9

Then enter your chosen new password (be sure to 

remember this password). After you have entered the new 

password for the first time, you need to enter the same 

password again for confirmation. The Information banner 

will then appear.
Press 

EXIT

 to return to the normal screen.

While toggling between channels, if a service which has a 

parental rating is selected then you will be asked to enter the 

correct password to view that channel. If the channel you are 

currently watching supports a parental rating then the rating will 

also be displayed in the Channel banner menu (see page 40).

Notes:

There are 15 age-based ratings, 

ranging from ‘4’ (years old) to ‘18’ 

(years old) and ‘None’. Eg. If the 

Parental Lock is set to ‘8’ (years 

old), only the services which have 

the parental rating of ‘8’ (years old) 

or under will be viewable without 

entering the Password.

You will be prompted to enter the 

password, when you set new 

parental rating.

You can set the new parental rating 

only when you enter the password 

correctly, otherwise the old parental 

code will be retained.

This feature allows you to have 

a parental control of the service 

viewing as per your preference.

Once a service is protected with 

a password, it cannot be viewed 

unless the correct password is 

provided.

32W0346A_ENG.indd   37

32W0346A_ENG.indd   37

5/28/07   9:40:29 AM

5/28/07   9:40:29 AM

Summary of Contents for TV20RN10D

















































Reviews: