17
Basic Operation
Note:
If the built-in tuner does not receive
anything (e.g. if no antenna is
connected) during TV-operation, then
the TV-unit will change to standby after
approx. 15 minutes.
Channel selection
With the
numbered buttons
.
Example:
No. 2: Press
0
and within 2 seconds, press
2
.
No. 29: Press
2
and within 2 seconds, press
9
.
Press
P +
or
–
to change up or down a channel. This
takes approx. 2 seconds. If the auto search only
stored 5 stations, only these 5 will appear. Skipped
channels will not appear (see P.15).
•
•
CH LIST
The CH LIST shows a list of all receivable
programmes. They are located in channels 1 to 99.
Press
CH LIST
to display the CH LIST.
Press
or
to select the desired channel.
Press
CH LIST
to display the selected channel.
Press
EXIT
to exit.
QuickView
button allows you to go back to the last selected channel.
Volume adjusting
Press
+
or
–
to adjust the volume. The volume level indicator
disappears after 4 seconds.
MUTE
Press . The sound will be cut off. MUTE will appear for
approx. 4 seconds.
The muting can be released by pressing again or
+
or
–
.
Information display
In the analogue TV mode: Press .
Channel number and picture size
setting will appear for approx. 4
seconds.
In the digital TV mode: Press . The
program information will appear
(see ‘Channel banner’ on page 40).
SLEEP TIMER
To set the sleep timer press . SLEEP and the minutes until
shut-off will appear. Each time you press the SLEEP time
shown will change. When the displayed time runs out, the unit
will switch to standby. The display will disappear after approx. 4
seconds
To cancel the sleep timer:
Press
repeatedly until ‘0’ appears.
Still picture
Press
FREEZE
to make a still picture. To cancel the still picture,
press
FREEZE
again.
Note:
The still image automatically goes out after 30 minutes.
S T E R E O 1
A R D
4 : 3
32W0146A_ENG.indd 17
32W0146A_ENG.indd 17
6/8/07 11:03:32 AM
6/8/07 11:03:32 AM
