Fixed
Center
Column
Fix the set by pushing towards the supporting plates at the
4
center of the vertical axis after completing the installation
of MLCD.
Install the Fix Bracket of both sets at the vertical axis by pushing towards the supporting plates at
•
the central area.
Install the "FIX BRACKET
•
UNIT" of both sets at the vertical axis by pushing towards the supporting
plates at the central area.
FIX BRACKET
•
UNIT is manufactured basically for OLM-4610/OLM-4650.
The other models need to detach EXTENSION BRACKET from FIX BRACKET UNIT to install.
Attach the FIX BRACKET UNIT to
the main frame and fix with fixing
bolts next to MLCd handle. Use
2.5mm allen wrench.
※DetachEXTENSIONBRACKETfromFIXBRACKETunitforall
modelsbesideOLM-4610,OLM-4650
Fasten the fixing bolt at
y
the proper position of each
MLCd model.
FIX BRACKET
FIXING BOLT
1
2
3
4
5
2.5mm allen wrench
Adjust the MLCD gap with the Adjuster.
6.
The gap of the MLCD can be fixed using the Adjuster.
To fix the gap detected between the MLCD or when the MLCD is tilted after the
•
installation, use the Adjuster.
Install the Adjuster at the lowest part of the Main Frame using the 5mm allen wrench.
•
ADJUSTER
(M10*50)
It is possible to lift or lower the Main
Frame using a 8mm allen wrench after the
Adjuster was installed at the lower
part of the Main Frame.
8mm allen wrench
- 40 -
www.oriondisplay.net
- 41 -
Infinitely Expandable
MLCD
W
ALL UNIT
