Installing the MLCD
3.
Attach the PEG and Guide Pin to the MLCD.
1
Assemble the four PEGs at the back of MLCD.
•
Install the Guide Pins where MLCD touches.
•
Install the MLCD from the lower part of the middle set.
2
Insert the PEGs in the PEG holes.
•
Put the set down slowly. The panels can be damaged by impact.
•
Install the MLCD from the bottom of both sides after completing the installation at the lower middle
•
part.
1
4
7
2
5
3
6
If you need to detach a MLCd set in the lower line, move
the set in the upper line to position "C". Remove guide
pins from the set in the lower line, move it to position "A"
and detach from the main frame.
Fasten 4 PEGs in the back of
MLCd with M5*30 bolts.
PEG
M5*30
FAN
STB
PWR ON
VIDEO
DVI-D
RS-232C
PC
LAN
SVC
ID SELECT
PDP
Made
in Korea
CAUTION
• Model Na
me : OLM
-4610
• Voltage :
AC~100 - 2
40V
• Curre
nt : Ma
x. 3A
• Frequenc
y : 50/60Hz
• Serial No
:
MLCD
FAN
STB
PWR ON
VIDEO
DVI-D
RS-232C
PC
LAN
SVC
ID SELECT
PDP
Made
in Korea
CAUTION
• Model Na
me : OLM
-4610
• Voltage :
AC~100 - 2
40V
• Curre
nt : Ma
x. 3A
• Frequenc
y : 50/60Hz
• Serial No
:
MLCD
Guide Pin
There is a hole for the
installation of the
Guide
Pin at the upper part
and the sides.
- 16 -
www.oriondisplay.net
- 17 -
Infinitely Expandable
MLCD
ST
AND UNIT
