background image

8

One-Year Limited Warranty

This Orion product is warranted against defects in materials or workmanship for a period of one year from 
the date of purchase. This warranty is for the benefit of the original retail purchaser only. During this war-
ranty period Orion Telescopes & Binoculars will repair or replace, at Orion’s option, any warranted instru-
ment that proves to be defective, provided it is returned postage paid. Proof of purchase (such as a copy 
of the original receipt) is required. This warranty is only valid in the country of purchase.
This warranty does not apply if, in Orion’s judgment, the instrument has been abused, mishandled, or 
modified, nor does it apply to normal wear and tear. This warranty gives you specific legal rights. It is not 
intended to remove or restrict your other legal rights under applicable local consumer law; your state or 
national statutory consumer rights governing the sale of consumer goods remain fully applicable. 
For further warranty information, please visit 

www.OrionTelescopes.com/warranty.

Orion Telescopes & Binoculars

Corporate Offices: 89 Hangar Way, Watsonville CA 95076 - USA

Customer Support: 

www.OrionTelescopes.com/contactus

Copyright © 2018 Orion Telescopes & Binoculars 

All Rights Reserved. No part of this product instruction or any of its contents may be reproduced, copied, modified or adapted, without the prior 

written consent of Orion Telescopes & Binoculars.

Summary of Contents for SkyView Pro GoTo System









Reviews: