http://www.orion.ua
4
1. Remove the Heater from the carton.
2. Place the heater on a firm level surface.
3. Plug the cord set into a 220V electrical outlet. Then you will see "OFF" show on the display screen
(See attached picture 1).
4. Press button
,you will find "LOW' and Room Temperature show on display screen, the low
heat(750W) start work.(see attached picture 2)
5. Press button
,it wil show "HIGH" on display screen, it means High heat(1500W) start work,(See
attached picture 3), Press
second time,it will show "AUTO" ,when this word show ,you can start
set temperature which you want(see attached picture 4)
6. Press button
, You can sent temperature from 5 degree to 32 degree which you want.
7. Press button
to select the desired time, You can control it during them on the display. The timer
indicator lights on ,it is possible to set timer from 0.5-8 hours. Once set timer is finished, the
appliance shuts off.
8. Press button
to set the heater oscillation automatic.
9. To stop the appliance, press the knob
. Fan is still operating for 30 seconds.
10. Unplug the appliance when hot in use.
Note: if the heat setting you have select is lower than the room temperature displayed, the heater will not
heat.
This appliance also has the swing function. To switch the function on, press the swing switch. To stop it,
press the swing switch again.
WARNING: ALWAYS UNPLUG THE CORD BEFORE MOVING OR SERVICING.
CLEANING: IMPORTANT! DO NOT IMMERSE HEATER IN WATER!
Wipe exterior surfaces of the heater with a moistened cloth.
DO NOT ATTEMPT TO TAKE APART HEATER. DO NOT REMOVE GRILL.
CAUTION:
Do not use gasoline benzene, thinner, harsh cleaners, etc. as they will damage the Heater.
STORAGE
: Store the Heater with these instructions in the original carton in a cool, dry place.
OPERATING INSTRUCTIONS
SWING BUTTON
CLEANING AND MAINTENANCE
