www.orion.ua
/
2
2. DESCRIPTION
1. Hour
2. Minute
3. Alarm Set/Off
4. Sleep
5. Tuning Control
6. Volume Control/Buzzer
7. Time Set
8. AM/FM Band Selector
9. Snooze Button
10. On/Off/Auto Switch
11. Hi-Lo Display Dimmer
BOTTOM OF SET: Battery compartment for 9 Volt (6F22) battery (not included).
3. BRIGHTNESS DISPLAY
The brightness display has two preset levels. To set the brightness level, switch the Hi-Lo
Display Dimmer (11) button to High or Low as preferred.
4. ELECTRONIC CLOCK OPERATION
1. Plug the AC line cord into 220V AC home outlet.
2. The clock display will flash on and off.
3. To set the correct time, press the Time Set Button (7) and Hour Button (1) together until
the correct hour is displayed. Press the Time Set Button (7) and the Minute Button (2)
together until the correct minute is displayed.
Note:
Connect a 9 Volt battery to the terminals inside the battery compartment for the power back-
up function. If the AC power supply is interrupted (as during a storm), the battery supplies
power to keep the time and alarm setting in memory.
The display will not be lit and the alarm will not sound until actual power is restored. The
battery only stores your settings in memory during a power failure.
5. RADIO OPERATION
1. Slide the On/Off/Auto Switch (10) to 'On' position.
2. Slide Band Selector (8) to FM or AM position.
3. Turn the Volume Control (6) to desired volume.
4. Turn the Tuning Control (5) to select your favorite station.
Note:
For AM reception, this radio incorporates a highly sensitive ferrite core bar antenna built into
the unit.
For FM reception, this set is specially equipped with an external wire as FM antenna. Be sure
to untwist it to fullest length for peak performance.
