- 136 -
- 137 -
ST
AND UNIT
W
ALL UNIT
SCREEN C
ONFIG'
GRAPHIC C
ONFIG'
SENSOR C
ONFIG'
OPERA
TION
FRAME INS
TALL'
8
. Fix "IR Bar"
y
Install the long IR Bar at the bottom side in advance and identify and install the IR bars for left and right sides at
the designated locations.
y
The connector should be drawn through the hole at the lower corners to the back side.
y
IR Bars should be fixed tightly with adhesive tapes.
Adhesive tape for IR Bar
IR Bar Connector
Hole
Fr
am
e
Ri
gh
t
Fra
m
e L
eft
Frame Bottom
IR Bar Connectors
➊
Insert the IR Bar connectors
to the Frame Bottom hole
and fix with tapes.
9
. Fix "Camera Module"
y
Identify the left and the right Camera modules, assemble them at the corner of the front glass and fix with bolts
as shown in the picture.
Camera Module
➌
Make the
2
grooves of the
Camera modules contacts the
front glass tightly and fix with
bolts.
➊
Assemble the Camera
Modules at the upper corners
of the front glass.
➋
Hook the Camera module at
the front glass.
FRONT GLASS
Camera Module
➋
Fix IR Bar Bottom to Frame Bottom.
The white surface of IR Bar must
contact with the glass. Fix IR Bars
to Frame bottom with adhesive
tapes.
➍
Fix IR Bar Left next to
Frame Left closely and
the white surface of IR
Bar must contact with the
glass.
➌
Fix IR Bar Right next to
Frame Right closely and the
white surface of IR Bar must
contact with the glass.
The white surface of
IR Bar must contact
with the glass
CONNECTOR
The surface where the
connecter is attached
should contact the
aluminum frame.
IR
B
A
R
Ri
gh
t
IR
B
A
R L
eft
IR BAR Bottom
The IR Bar Connectors should be
fixed toward Frame sides.
OPE-11701
Innovative e-Board of New Conception
e-Board