www.orion.ua
7
Don't use it in the way of heating the aluminum foil directly or indirectly in
case it will cause danger.
Don't move it when the pot is on it or it is still connected with the
electricity.
Don't touch the panel surface. Because after the cooking, the high-
temperature heat will be transferred to the surface.
Don't wash it with water or put it in the water.
Please keep the cooker clean in case some sundries will get into the
fans, and make it can't work.
Don't use the induction cooker on the metal board or metal table.
Common breakdown check list
Common breakdown
Breakdown checking
1.
When insert the plug,
cannot hear the sound
of Beep and power
button indicator light is
not on.
1. Check whether the plug is loose.
2. Check whether there is power supply.
3. If both are ok then take it to the authorized
service center.
2.
The cooker stops
working after sounding
warning Beep for 15
seconds.
1. Check if the vessel used is suitable or
not.
2. Check if the vessel put in the center of the
ceramic/glass plate.
3. Check the diameter of the pot bottom area
is more than 12 cm.
3.
It stops heating
suddenly when it is
being used.
1. Check if the surrounding temperature is
over the requirement.
2. Check if the air blow vent is blocked.
3. When it is in the state of heat preservation,
it means it has reached the set temperature.
This marking indicates that this product should not be disposed with other
household wastes throughout the EU. To prevent possible harm to the
environment or human health from uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse of material resources. To return
your used device, please use the return and collection systems or contact the
retailer where the product was purchased. They can take this product for
environmental safe recycling.
Additional information you can find on ORION web-site
www.orion.ua
Send your comments and propositions to