www.orion.ua
5
3. Press the Function to Rice the corresponding indicator light or LED will be
on. There is a function for showing Electricity and Voltage by pressing the
button Electricity / Voltage.
4. Press the Function to HotPot, the corresponding indicator light or LED will
be on. There is a function for showing Electricity and Voltage by pressing
the button Electricity / Voltage.
5. Press the Boiling function, the corresponding indicator light or LED will be
on. There is a function for showing Electricity and Voltage by pressing the
button Electricity / Voltage.
6. Press the Chaffy Dish function, the corresponding indicator light or LED
will be on to display the default power of 200 watts. However you can set
it to your desired wattage level ranging from 200-1800 watts of your
choice of cooking by using +/-.
7. Press the Fry function, the corresponding indicator light or LED will be on
to display the default Temperature setting of the Fry function. However
you can set it to your desired Temperature level ranging from 80°C-280°C
depending upon your choice of cooking by using +/-.
Safety protecting device
1. Has the electric circuit examination function: When the electric circuit
breaks down, the window displays "E0".
2. Has the pot examination function: when the induction cooker is being
used, like putting aside the pot, the buzzer will give an alarm, displays
E1.
3. Has the small piece examination function: when the using material quality
is not right or the diameter of the pot is less than 8 cm, the buzzer will give
an alarm, displays E1.
4. Has the switch power tube over temperature protection: when it excesses
temperature, the induction cooker will close power outlet, and the buzzer
gives a long whistle, and displays E2.
5. Has high, low-voltage protecting function: when the high voltage is
greater than or equal to 252V, displays E3, when low voltage is less than
or equal to 175V, displays E4.
6. Has sensor examination function: when the sensor is abnormal or has
short circuit, displays E5.
7. Has the function to protect pot bottom from being over-heated: Under any
working status, if the bottom of the pot excesses temperature (the
temperature is above 280 degree), the induction cooker closes power
outlet, displays E6.
8. When using the function of hotpot, it will close down automatically in two
hours without key-press in order to avoid accident when people leave.
Cleaning
1. Please remove the power line from the outlet before you clean it, and wait
until the ceramic panel of the induction cooker cool off.
