13
Day/Night Mode:
If set to AUTO, the camera will automatically switch according to current
lighting conditions that persist for a set period of time. The mode can also be set to specifically
DAY or NIGHT, as well as SCHEDULE.
Adaptive IR:
if set ON, IR brightness changes according to the lighting conditions.
o
White Balance Control:
WB Mode:
Can be set to MANUAL, AUTO, AUTO (wideshot mode), CUSTOM (oneshot mode), or
WB HOLD. This is used to make the colors in the image appear consistent, compensating for the
different colors present in different light sources. The IP Camera can be set to automatically
identify the light source and compensate accordingly. CUSTOM (oneshot mode) can be used to
satisfy a condition that is not satisfied using other AUTO settings.
MWB Mode:
If white balance is set to MANUAL, the light source can be manually added, such as
INDOOR (2800K), OUTDOOR (6500K), or FLUORESCENT (4000K).
o
Image Property Control:
Sharpness:
Modifies the video signal sharpness. Default: 8, Range: 1-15
Brightness:
Modifies the video signal brightness. Default: 15, Range: 0-30
Contrast:
Modifies the video signal contrast. Default: 15, Range: 0-30
Color:
Modifies the video signal color. Default: 15, Range: 0-30
4.3 Live
4.3.1 Setup
This section allows for general viewer settings to be adjusted.
o
Viewer Setup:
LiveView Protocol:
Choose which protocol to use for live video. RTP Unicast (UDP), RTP
Multicast (UDP), or RTP over RTSP (TCP) can be selected.
Buffering Time:
Buffering time can be set for a number between 0-90 times 1/30 seconds, or a
range of 1-3 seconds.
o
Viewer OSD Setup:
Resolution:
Toggle OSD Resolution ON/OFF.
Date/Time:
Toggle OSD Date/Time ON/OFF.
Event State:
Toggle OSD Event State ON/OFF.
