2
IMPORTANT SAFETY INSTRUCTIONS
1.
Read these instructions.
2.
Keep these instructions.
3.
Heed all warnings.
4.
Follow all instructions.
5.
Do not use this device near water.
6.
Clean only with a dry cloth.
7.
Do not block any of the ventilation openings. Install in accordance with the manufacturer’s instructions.
8.
Do not install near any heat sources, such as radiators, heat registers, stoves, or any other devices that produce heat.
9.
Protect the power cord from being walked on or pinched, particularly at plugs, power outlets, or the point where the
cord exits the device.
10.
Only use attachments or accessories specified by the manufacturer.
11.
Use only with a cart, stand, tripod, bracket, or table mount specified by the manufacturer or sold with the device.
When a cart is used, use caution when moving the cart/device combination to avoid injury from the cart tipping over.
12.
Unplug this device during lightning storms or when unused for long periods of time.
13.
Refer to qualified service personnel for all servicing needs. Servicing is required when the device has been damaged in
any way, such as when the power supply cord or plug is damaged, liquid spills or objects fall onto the device, the device
is exposed to rain or moisture, the device does not operate normally, or has been dropped.
14.
Caution: Danger of explosion if the battery is not properly replaced. Replace only with the same or equivalent type of
battery.
15.
These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not
perform any servicing other than that contained in the operating instructions unless you are qualified to do so.
USA & CANADA: USE CLASS 2 POWER SUPPLY ONLY
This product was tested with a UPS to satisfy EN 61000-4-11 test conditions (voltage dips and short interruptions
test) under the EN 50130-4: 2011 standard.
