Notes
Use only the parts included with unit to ensure proper installation. The use of
unauthorized parts can cause malfunctions
Consult with your nearest dealer if installation requires the drilling of holes or other
modifications of the vehicle.
Install the unit where it does not get in the driver's way and cannot injure the
passenger if there is a sudden stop.
The semiconductor laser will be damaged if it overheats,
If installation angle exceeds 30 from horizontal, the unit might not give its optimum
performance.
The cords must not cover up the area shown in the figure below. This is necessary
to allow the amplifires to radiate freely.
Before finally installing the unit, connect the wiring temporarily, making sure that
all connections are correct and the unit and the system are properly working.
and can void the guarantee.
so don't install the unit in
high temperature environment -- for instance, near a heater outlet.
INSTALLATION
28
INSTALLATION
Do not cover the area
