6
The following software can be located
on the right hand side of the product
support page.
1. Download, unzip and run the
installer that is compatible with
your operating system.
2. Run “GlobalSetup.exe” to run the
install wizard. Select language to
install and go through the prompts
to install the G4 camera driver
and prerequisite software (
Figure
4.1). The wizard will automatically
detect which prerequisites you
need and prompt you to install
them (
Figure 4.2).
3. Next select to install the G4
ASCOM driver (
Figure 4.3). Note
that ASCOM is only required if you
wish to use the camera in another
program, such as Nebulosity and
MaximDL, or if you wish to use
the camera as an autoguider.
Select language to install and
go through the prompts until the
software is installed.
4. Next select to install the Camera
Studio Application (
Figure 4.3).
Select language to install and
go through the prompts until the
software is installed.
Connecting the Camera to the PC
After the software and drivers have
been installed, connect the camera to
the USB port on your computer using
the supplied USB cable. You do not
need to plug in external power yet.
Windows will automatically detect the camera and install it onto your computer.
Wait for the message to appear,
Device Installed Successfully.
Figure 4.3.
Figure 4.1.
Figure 4.2.