manualshive.com logo in svg

ORiNG IGS-9084GP-FB2-MM, User Manual

Share
Download
ORiNG IGS-9084GP-FB2-MM User Manual Download Page 62

IGS-9084GP-FB2 Series User Manual

ORing Industrial Networking Corp

61

Label

Description

Port

Switch port number

LACP

Yes

 means LACP is enabled and the port link is up.

No

 means

LACP is not enabled or the port link is down.

Backup

 means the

port cannot join in the aggregation group unless other ports are

removed. The LACP status is disabled.

Key

The key assigned to the port. Only ports with the same key can be

aggregated

Aggr ID

The aggregation ID assigned to the aggregation group

Partner System ID

The partner’s system ID (MAC address)

Partner Port

The partner’s port number associated with the port

Refresh

Click to refresh the page immediately

Auto-refresh

Check to enable an automatic refresh of the page at regular

intervals

LACP Statistics

This page provides an overview of the LACP statistics for all ports.

Summary of Contents for IGS-9084GP-FB2-MM
















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands