IES-3080 / IES-3062 SERIES User’s Manual
ORing Industrial Networking Corp
67
applicable in half-duplex only.
5.1.10.5 Port Monitoring
Port monitoring function supports TX (egress) only, RX (ingress) only, and both TX/RX
monitoring. TX monitoring sends any data that egress out checked TX source ports to a
selected TX destination port as well. RX monitoring sends any data that ingress in checked
RX source ports out to a selected RX destination port as well as sending the frame where it
normally would have gone. Note that keep all source ports unchecked in order to disable port
monitoring.
Port monitoring interface
The following table describes the labels in this screen.
Label
Description
Destination Port
The port will receive a copied frame from source port for
monitoring purpose.
Source Port
The port will be monitored. Mark the blank of TX or RX to be
monitored.
TX
The frames come into switch port.
RX
The frames receive by switch port.
Apply
Click “
Apply
” to activate the configurations.
Clear
Clear all marked blank.(disable the function)
Help
Show help file.
5.1.10.6 Traffic Monitor
The function can monitor switch Traffic. If traffic is too large, Switch will sent SYSLOG Event or
SMTP Mail . .