ORiNG IES-3062 Series User Manual Download Page 74

Page: 74 / 107

IES-3080 / IES-3062 SERIES User’s Manual

ORing Industrial Networking Corp

Port Overview interface

The following table describes the labels in this screen.

Label

Description

Type

Show port speed and media type.

Link

Show port link status.

State

Show ports enable or disable.

TX GOOD Packet

The number of good packets sent by this port.

TX Bad Packet

The number of bad packets sent by this port.

RX GOOD Packet

The number of good packets received by this port.

RX Bad Packet

The number of bad packets received by this port.

TX Abort Packet

The number of packets aborted by this port.

Packet Collision

The number of times a collision detected by this port.

Clear

Clear all counters.

Help

Show help file.

5.1.10.4 Port Counters

This page shows statistic counters for the port. The "Clear" button is to reset all counters to

zero for all ports.

Port Counters interface

Summary of Contents for IES-3062 Series












































































































Search results

Summary of Contents for IES-3062 Series

Reviews:

ORiNG IES-3062 Series, User Manual, Page: 74 / 107

Search results

Summary of Contents for IES-3062 Series

Reviews: