
IES-3080 / IES-3062 SERIES User’s Manual
ORing Industrial Networking Corp
27
MSTP Setting interface
The following table describes the labels in this screen.
Label
Description
MSTP Enable
You must enable or disable MSTP function before configuring the
related parameters.
Force Version
The Force Version parameter can be used to force a VLAN Bridge
that supports RSTP to operate in an STP-compatible manner.
Configuration Name
The same MST Region must have the same MST configuration
name.
Revision Level
(0-65535)
The same MST Region must have the same revision level.
Priority (0-61440)
A value used to identify the root bridge. The bridge with the
lowest value has the highest priority and is selected as the root.
If the value changes, You must reboot the switch. The value
must be multiple of 4096 according to the protocol standard rule.
Max Age Time(6-40)
The number of seconds a bridge waits without receiving
Spanning-tree Protocol configuration messages before attempting
a reconfiguration. Enter a value between 6 through 40.
Hello Time (1-10)
The setting follow the rule below to configure the MAX Age, Hello