ORiNG IDS-5612 Series, User Manual

Page: 25 / 69

IDS-5612 Series User’s Manual
21 ORing Industrial Networking Corp.
The following table describes the labels in this screen.
Label Description
Using DHCP/BOOTP IP Address automatically assigned by a DHCP server in your network.
Static IP Address Manually assigning an IP address.
Subnet Mask
All devices on the network must have the same subnet mask to communicate on the
network.
Gateway Enter the IP address of the router in you network.
DNS Server
Enter the IP address of the DNS server, The DNS server translates domain names into
IP address.
Switch Mode
Redundant:
When the connection between master-link and LAN fails, the DS can automatically
switch to another LAN port within10mS, and still guarantees a non-stop connection
Switch:
Daisy Chain support to reduce usage of switch ports.
Table 5-3 Network setting
PPPoE
PPPoE (Point-to-Point Protocol over Ethernet), Device can use PPPoE mode to
connect the Network. Input the “username ” and “ Password ”, then click “ Connect ”
button. If the device has been connected, the “Link Status ” will become the “Link
up” and device will get an IP address from PPPoE server
。
Click “ Disconnect ” button
to disconnect the PPPoE connection.