manualshive.com logo in svg

ORiNG IAR-142 Series, User Manual, Page: 56 / 57

Share
Download
ORiNG IAR-142 Series User Manual Download Page 56

IAR-142-/142+-3G  User  Manual 

 

 

ORing Industrial Networking Corp.                                                                                                55 

Compliance 

FCC Statement 

This  device  complies  with  Part  15  of  the  FCC  Rules.  Operation  is  subject  to  the 

following two conditions:   

(1) this device may not cause harmful interference and (2) this device must accept any 

interference received, including interference that may cause undesired operation. 

 

RF exposure warning: The equipment complies with RF exposure limits set forth for an 

uncontrolled  environment.  The  antenna(s)  used  for  this  transmitter  must  not  be 

co-located or operating in conjunction with any other antenna or transmitter. 

 

You  are  cautioned  that  changes  or  modifications  not  expressly  approved  by  the  party 

responsible  for  compliance  could  void  your  authority  to  operate  the  equipment.  This 

device  should  be  operated  with  minimum  distance  20cm  between  the  device  and  all 

persons. Operations in the 5.15-5.25GHz band are restricted to indoor usage only. 

 

 

Industry Canada Statement 

This device complies with Industry Canada licence-exempt RSS standard(s). Operation 

is  subject  to  the  following  two  conditions:  (1)  this  device  may  not  cause  interference, 

and (2) this device must accept any interference, including interference that may cause 

undesired operation of the device.   

 

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils 

radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : 

(1)  l'appareil  ne  doit  pas  produire  de  brouillage,  et  (2)  l'utilisateur  de  l'appareil  doit 

accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en 

compromettre le fonctionnement.   

 

Industry Canada - Class B This digital apparatus does not exceed the Class B limits for 

radio  noise  emissions  from  digital  apparatus  as  set  out  in  the  interference-causing 

equipment standard entitled “Digital Apparatus,” ICES-003 of Industry Canada.   

 

Cet appareil numérique respecte les limites de bruits radioélectriques applicables aux 

appareils numériques de Classe B prescrites dans la norme sur le matérial brouilleur: 

“Appareils Numériques,” NMB-003 édictée par l’Industrie.   

Operation  is  subject  to  the  following  two  conditions:  (1)  this  device  may  not  cause 

Summary of Contents for IAR-142 Series


























































Reviews:

No comments