manualshive.com logo in svg

ORiNG IAP-320+, User Manual, Page: 35 / 52

Share
Download
ORiNG IAP-320+ User Manual Download Page 35

IAP-320 / 320+ User’s Manual 

ORing Industrial Networking Corp.                                                                                                32 

 

 

 

The following table describes the labels in this screen. 

Label 

Description 

MAC Filter

 

Enable or disable the function of MAC filter.    MAC address 

allowed or denied option is selected by you. 

MAC Filter List

 

This list will display the MAC addresses that are in the selected 

filter. 

Connected Clients

 

This list will display the wireless MAC addresses that linked with 

AP. 

MAC Address 

MAC addresses need to be added to or clear from MAC filter list.

Apply 

Click Apply to set the configurations. 

 

 

System Event 

When the AP event triggered, the notification procedure will be performed according to 

the type of the event.    Which notification would be performed depends on the selection 

of corresponding option in the 

Advanced Setting > System Event

 page. 

Summary of Contents for IAP-320+





















































Reviews:

No comments