manualshive.com logo in svg

ORiNG IAP-320+, User Manual, Page: 19 / 52

Share
Download
ORiNG IAP-320+ User Manual Download Page 19

IAP-320 / 320+ User’s Manual 

ORing Industrial Networking Corp.                                                                                                16 

transparently connect to the other AP even they didn’t support 

WDS. 

Client

 

In this mode the AP functions as a wireless client to connect 

to other AP, thus provides transparent connection between 

Ethernet & wireless port. This mode provides no Access 

Point services but with 802.1X supported.

 

Bridge 

This mode provides Static LAN-to-LAN Bridging functionality.  

The static LAN-to-LAN bridging function is supported through 

Wireless Distribution System (WDS). 

In each mode, the IAP-320 / 320+ forwards packet between its Ethernet interface and 

wireless interface for wired hosts on the Ethernet side, and wireless hosts on the wireless 

side.

 

 

Setting WDS (Bridge Mode) 

 

WDS setting interface 

 

This type of wireless link is established between two IEEE 802.11 access points.   

Wireless packets transmitted along the WDS link comply with the IEEE 802.11 WDS 

(Wireless Distribution System) format at the link layer.   

Summary of Contents for IAP-320+





















































Reviews:

No comments