17
In accordance with the degree defined on the test track, perform the water hardness
setting of your machine as indicated below.
•
Set the On/Off button (4) to off position (1).
•
Press and hold Start/Pause (3) key.
•
Set the On/Off button (4) to number 2 position by rotating it clockwise (righ-
tward) 1 step.
•
Hold your finger on the Start/Pause (3) key till all the lights flash and then the
"water hardness degree indicator" predefined on your machine is displayed, (see
setting table for water hardness degree).
•
You can configure the settings according to the setting table for water hardness
degree by pressing Start/Pause key (3).
•
After selecting the water hardness degree, cut off the power of the machine by
switching the On/Off button (4) to off position (1). The last selected water hard-
ness setting will be stored in the memory.
Warning:
In case of moving, to configure the water hardness setting according to
the water hardness of the area you have moved is important for the effectiveness of
washing.
4
Summary of Contents for ORC 15 WA++
