Orima ORC 15 WA++, Instruction Manual

Page: 48 / 143

13
Fitting the machine undercounter
If you wish to fit your machine undercounter, check whether
you have sufficient space under your countertop and whether
the wiring-plumbing is suitable to do so.
1
If you decide that
the space under the countertop is suitable for fitting your
machine, remove the worktop as shown in the illustration.
2
Warning: The stand part which we will settle our machine
under it by removing its worktop has to be stable in such a
way not to allow balance disorder.
To remove the worktop, remove the screws that hold the
worktop which are located at the rear of the machine; then
push the front panel 1 cm from the front side towards the rear
and lift it.