5
Origin Effects BASSRIG ‘64 BLACK PANEL
Connecting the BASSRIG ‘64 BLACK PANEL
9VDC:
Connect a 9VDC 2.1mm centre-negative mains power adaptor (minimum 150mA).
INSTR:
Connect to your bass, guitar or other instrument.
AMP OUT:
Connect to your amp or power amp.
DI OUT:
Connect to your mixer, audio interface or PA system.
Main Controls
DRIVE:
The gain control functions exactly like the volume knob on a non-master-volume valve amp. Turn it
clockwise for more gain, drive and distortion. Turn counterclockwise to clean things up.
BLEND:
This control blends in your clean signal in parallel with the recreated amp tone. Set the control fully
clockwise then turn it counterclockwise to progressively mix in your original clean signal. This can help add
definition to your tone, especially in the low end when using overdriven sounds.
