8
Origin Effects BASSRIG ‘64 BLACK PANEL
Setting your AMP OUT EQ:
Use the tables below to help you set up the BASSRIG ‘64 Black Panel for the first time with a new bass
amplifier or flat-response device. Working through Steps 1 and 2 allows you to “set-and-forget” the AMP
OUT EQ controls and move on to having fun dialling in your ideal tone with the main controls.
AMPLIFIER OR CONNECTED DEVICE
HORN CUT SWITCH POSITION
Amplifier and horn-loaded cab
2k or 4k, depending on cab crossover
frequency
Amplifier and non-horn-loaded cab
Off
Direct to mixer, PA or interface from DI OUT
The Amp Out EQ does not affect this
output.
HOW IS THE BASSRIG’s TONE?
ADJ CONTROL POSITION
I used the HORN CUT switch and my tone is still
fizzy
Try turning the HF control counterclockwise
I used the HORN CUT and now my tone is too dull
Try turning the HF control clockwise
It sounds too boomy through my big cab
Try turning the LF control counterclockwise
It sounds too thin through my small cab
Try turning the LF control clockwise
It’s perfect!
Great. Stop tweaking and start playing!
Step 1: Set HORN CUT for the connected amp or device
Step 2: Fine-tune the AMP OUT EQ with the HF and LF controls
*Please note: the AMP OUT EQ is only applied to the AMP OUT jack. The DI OUT is not affected.
