2
3
844·674·4461
WWW.ORIGINACOUSTICS.COM
DSUB6 INSTALLATION MANUAL
Required Tools/Items
• Speaker wire
• Wire stripper
• Drill (5/16” or 8mm)
• Wrench (½”)
For this setup, use a
multi-stranded wiring designed
for amplifier to speaker connec-
tions. The gauge of wire used
can have an impact on the per-
formance of your speakers and
we would recommend that you
choose the largest wire size that
is practical for your installation.
Which gauge to select depends
on the length of wire to be used
on any particular speaker. In
general the shorter the run the
smaller the wire size you can
use, however you can never go
wrong by using a thicker gauge.
Wire Length
Recommended
Gauge
Feet
Meter
0-100
0-30
16
50-150 15-45 14
100+
30+
12
Speaker Wire Recommendations
What’s Included: DSUB6
• Subwoofer enclosure
• Terminal jumper (for use only when driving the DSUB6 with a
single channel
• Template for locating mounting screws
• Lag screws (x6)
• Washers (x6)
Installation Requirements and Recommendations
Subwoofer
Enclosure
Joist
Joist
Figure 3.1: DSUB6 Enclosure
