5
WWW.ORIGINACOUSTICS.COM
CSUB10N & CSUB10NCE INSTALLATION MANUAL
3) Attach the Wire to the Enclosure
Depending on how you ran the
wires to the subwoofer loca-
tion, the wires can be attached
to the connectors at the top or
bottom of the enclosure. Push
on the end of the connector
and insert the wire.
4) Drywall
The drywall is now ready to go up. The placeholder plate should
not be removed until the subwoofer is installed. Install the dry-
wall to the edge of the plate, but do not tape or mud the gap. The
gap should not be larger than ⅛” (3mm).
The drywall screws should be no further apart than 12”, or 8”
along the edge.
Figure 5.1: Connecting Wire
