3
WWW.ORIGINACOUSTICS.COM
CSUB10N & CSUB10NCE INSTALLATION MANUAL
Enclosure Installation
1) Installing the Wire
Strip ¼ to ½ inches (6 to 12
mm) of the insulation off both
ends of the wire. To avoid stray
strands, twist them at the end.
Connect the wire to the am-
plifier, but don’t plug in the
amplifier AC just yet. Route the
wire through the walls to the
subwoofer location.
You will need a wire that has at least two conductors; one that can be
identified as the positive and the other as the negative. All two conductor
wires have some means of identifying which conductor is which, but at
times this identification may be subtle. It’s crucial that you keep track of
which wire you use for positive (+) and negative (-). Typically if the wires
are colored red and black or copper and silver, but sometimes other col-
ors or patterns are used. You can choose whichever color of wire you want
to be positive and negative as long as you remain consistent throughout
the install.
About Speaker Wire
Figure 3.1: Installing the Wire