Installation
17
How to install the motorized linear slide
Install so that the entire area of the bottom face of the motorized linear slide contacts the mounting plate.
1. Secure the motorized linear slide from the upper face using the included bolts for mounting.
2. Secure the guide rail from the back side of the mounting plate with screws (not included).
6 mm or less
Guide rail fixing screws (M5)
Tightening torque: 5 N
･
m (710 oz-in)
Bolts for mounting (M5, included)
Tightening torque: 5 N
･
m (710 oz-in)
The thickness of the guide rail is 6 mm. Make sure the screw length to secure the
guide rail is 6 mm or less from the mounting plate. Exceeding 6 mm may cause the
table to break, leading to injury or mechanical damage.
Guide rail
Mounting plate
Table
6 mm or less
Motorized linear
slide cross section
