Guidance
37
▐
10-4
Positioning
operation
This section explains an example to perform positioning operation using the
MEXE02
.
When using the pulse input type, set operation data to the programmable controller to perform operation.
Before operating the motor, check the condition of the surrounding area to ensure safety.
STEP 1
Set the operation data using the
MEXE02
Using the
MEXE02
, set the operation data of No.0 as follows.
Time
Speed
2,000 [Hz]
1.5 [kHz/s]
8,500 [step]
1.5 [kHz/s]
1 [s]
1 [s]
3 [s]
500 [Hz]
Operation data setting screen
STEP 2
Operate the motor
1. Click the [Teaching, remote operation] icon in the toolbar or click the [Teaching, remote operation] short-cut
button.
The teaching, remote operation window appears.
or
2. Click "Start the teaching remote operation."
The pop-up window (Warning) appears, and click [Yes].
Teaching, remote operation is enabled, and red color and green color on the POWER/ALARM LED blink
simultaneously. (Red and green colors may overlap and it may be visible to orange.)
Input in increments of 0.001 kHz/s.
