10
Water
distribution
tube
The water distribution
tube blocks
Clean the water distribution tube
Water line
The water quality is too
poor. The water line
blocks
Using a filter apparatus installed in
front of the water inlet valve.
Silica gel tubes
The silica gel tubes
distort, lead to block.
Make the silica gel tubes resile
Water dump
valve
The water dump valve
bad, the water leakes
Replace the water dump valve
Water
System
Floater valve
The floater valve leaks.
Lead to few ice produced.
Repair or replace
3.
Ice Cube is not OK
P
k
roblem
inds
Check part
or point
Possible Cause
Probable Correction
Condenser
The condenser is dirty or
the air grills are covered
Clean the condenser. Leave space
around the machine
The ambient
temperature
The ambient temperature
is too high.
Adjust the ambient temperature.
Electronic
control box
The setting temperature
is high.
See the service manual "adjust the
size of ice cubes"
Cubes are
too small
Refrigerant
Refrigerant leaks
Recharge.
Electronic
control box
The setting temperature
of Electronic control box
is low.
See the service manual "adjust the
size of ice cubes"
Sensor
Temperature sensor of the
evaporator damages
Replace the sensor of temperature.
Cubes are
too big
The ambient
and water
temperature
The ambient temperature
and water temperature is
too low.
Adjust the temperature.
Water quality
The water quality is poor Using a water-soften / filter
apparatus installed in front of the
water inlet valve.
Evaporator
Ice machine is dirty
Clean and sanitize the ice machine
Water
distribution
tube
The water distribution
tube blocks
partially
Clean the water distribution tube
The water
pump
The water pump is dirty
Clean the water pump inside
The water lack
The water floater is bad
Replace the water floater
The cubes
are partially
formed--hav
e ragged
sides or
white and
deformity
Water trough
Water trough level is too
low
Adjust the water floater
