Operation
15
Priority Channel (PRI)
You can select a priority channel which is used during scanning functions
and can be accessed immediately via the INS button on the Microphone.
To Select the Primary Channel
1. Select the desired primary channel using the channel control, including
any CTCSS or DCS code.
2. Press the
PRI
button on the unit or press
and hold
the
INS
button on the
Microphone.
To switch to the primary Channel
1. Press the
INS
button on the Microphone.
BEEP Tone (BPT)
The Beep Tone emits a tone when you press any of the buttons on the
Microphone (except the PTT switch)
To Turn ON the BEEP Tone
1. Press
and hold
the
BPT
button for 2 seconds,
BPT
appears on the LCD
display.
To Turn OFF the BEEP Tone
1. Press
and hold
the
BPT
button for 2 seconds, the
BPT
disappears from
the LCD display.
Memory Scan
Initially All 80 channels are stored in memory, indicated by MEM next to the
channel on the LCD display. During a memory scan all channels in memory
are scanned for a signal.
Summary of Contents for UHF058
Page 29: ......