background image

Operation

9

Operation

Dual Function buttons

The dual function button (buttons 7 to 13) have two functions.  
To use the primary function (printed on the button) just press the button. To 
use the secondary function (printed above the button)  
press 

and hold

 the button for 2 seconds.

Power ON / OFF

Rotate the power switch in a clockwise direction to turn the unit ON, 
adjust the volume to a comfortable level. Rotate the Power Switch counter 
clockwise until it click to turn off the power.

Squelch

To adjust the level of squelch use the rotary SQL control. Turning the control 
clockwise reduces the amount of squelch, turning counter clockwise 
increase the amount of squelch. To reduce the signals that you can hear, 
increase the squelch, to hear more signals which may include weak signals 
decrease the squelch.

To Select a Channel

To select a channel rotate the CH control clockwise or counter clockwise to 
the desired channel.

To Select A CTCSS / DCS or 60Rx Receive channels

Press the 

CTCSS / DCS

 button 

once

 to obtain CTCSS channel select. Press 

twice

 to obtain DCS channel select.

Press 

and hold

 the button for 2 seconds to obtain the 60Rx channels.

Summary of Contents for UHF058































Reviews: