4
GETTING STARTED
6 Press [
] to turn the Parent Unit on.
• Before first use, or if it has been out of use for a long
time, the Parent Unit will need to be charged for 16
hours before use. After this time, the Parent Unit will
operate from the Charger pod when switched on. Note
that the Parent Unit cannot be used without batteries,
even if it is placed in the charger.
For the Baby Unit
1 Plug the power cord into the power input at the side of
the Baby Unit and plug the adaptor plug into a mains
power socket.
2 Press [
] to turn on the Baby Unit.
• The Baby Unit should be placed about 1 metre
to 1.5 metres away from the baby's cot on a flat
surface. Never place the Baby Unit inside the cot,
bed or playpen. Make sure the unit, cords and mains
adaptor are out of reach of the baby and other
young children. Never place either Unit on antique
or polished surfaces (as slippage or scuffing may
occur). The unit may cause harm if it falls onto baby
or other young children.
Note:
If you place the Parent and Baby units too close together
you will hear a high pitched noise called "feedback", this is
normal. The units are designed to be located in separate
rooms.
To prevent feedback, do not take the parent unit into the
nursery/baby's room.
OR006417 SC110 user manual_04-27-16.indd 4
2016/4/27 17:30:46
