7
OpERATION
Operation
Once you have set up your baby monitor, you will be
able to hear the sounds in your baby´s room through
the parent unit. You will also be able to see those
sounds as the green sound sensor lights around the
top of the parent unit, which rise and fall with the
volume level.
Note:
Use only the mains power adaptors supplied with this If
the connection between the parent unit and baby unit is
broken at any time the green “Link” light on the parent
unit will flash and the green sensor light will cease to
react to any sounds. To re−establish the “Link”, follow the
directions in the “Troubleshooting” chapter.
Powering on/off the baby monitor
After having connected the baby monitor you will
have to switch on both units. Press the
On/Off key
on each unit. To switch off the unit press and hold
down the
On/Off key
.
Volume
You can adjust the volume at which you hear your
baby by using the keys
and
on the parent
unit. This will not effect the sensitivity of your baby
monitor, only the volume at which you hear those
sounds through the parent unit.
Battery charge indicator and battery low warning
The parent unit will work up to 10 hours out of the
charger pod, but this depends on the level of charge
in the batteries. If the charge becomes low, a “battery
low warning beep” will sound and the power LED on
the parent unit’s will begin to flash. If this occurs you
should return the parent unit to the charger pod to
re−charge the batteries. You can still use your parent
unit from the charger pod.
OR006417 SC110 user manual_04-27-16.indd 7
2016/4/27 17:30:46
