OREX AA095042-00, Service Manual

Page: 40 / 77

8. Remove the transparent protective sheet/protective envelope from the
cleaning plate.
9. Remove the protective paper strips from the cleaning plate to expose
the adhesive.
10. Place the cleaning plate on the tray. Make sure the cleaning plate is
placed in the correct direction, as specified on the plate.
11. While holding onto the plate, push the plate into the reader. It should
go in almost entirely. A 10 cm segment of the plate should remain
visible. Then pull the plate out.
12. Repeat step 11 four to six times.
Preventive Maintenance
Page
35 of 35