●
Connection and Installation
Connect the HDMI Transmitter output BNC ports using single RG6 coaxial cables
to included Receiver. It is strongly recommended that factory terminated cable
assemblies be used and their length shall not exceed 328 ft respectively.
Connect the HDMI output from the Receiver to high-definition display devices
such as HD-LCD, HD-DLP and HD projectors with HDMI input interfaces. Use
high-speed HDMI cables that are recommended for the distances that are
required for each connection. HDMI cable length should not exceed 16 ft.
The source can be controlled from the display. This is accomplished by using an
optional IR Receiver pigtail pointing away from the display, which can be connected
to the receiver portion of the extender. The IR Transmitter pigtail is then connected
to the Transmitter of the extender and pointed at the source.
