IR RECEIVER (RX)
To control the source:
Plug IR Receiver into IR RX port of receiver unit; place
receiver at or near display.
To control the display:
Plug IR Receiver into IR RX port of transmitter unit; place
receiver in position where it is able to receive remote signals.
IR BLASTER (TX)
To control the source:
Plug IR Blaster into IR TX port of transmitter unit; place
blaster in front of the IR eye of the source.
To control the display:
Plug IR Blaster into IR TX port of receiver unit; place
blaster in front of the IR eye of the display.
