4
E
N
BACKLIGHT
The main unit, when connected to the AC power, is equipped with
an automatic backlight. Every time you press a window on the main
unit, the
backlight will come on for a few seconds. This
function will be disabled for sole battery operation. The
backlight will also come on for a few seconds when the alarm is
triggered.
THE RF CALENDAR CLOCK
The calendar clock is radio-controlled. It automatically
synchronizes its current time and date when it is brought within
range of the radio signal generated from Frankfurt, Germany (DCF77).
You can also set the calendar clock manually.
To do so,
1.Press the RF calendar clock and alarm window.
2.Press and hold [
] to disable the radio reception function.
3.Press and hold [SET]
until
the digit
flashes
.
4.Use [
] and [
] to change to the desired setting.
5.Press [SET] for the next item setting.
6.Repeat from Step 4 to finish all the settings for:
-
Clock display formats (12hr or 24hr)
-
Display language of the day-of-the-week
-
Clock
-
Calendar display formats (Month-Day, Day-Month)
-
Calendar
For the display language, you can choose:
-
English (E)
-
German (D)
-
French (F)
-
Italian (I)
-
Spanish (S)
7.Press [SET] to confirm.
The calendar clock and alarm window has three displays: clock
with seconds, clock with day-of-the-week and calendar. To change
from one display to another, press the window once.
THE DAILY ALARM
To set the daily alarm,
1.Press the RF calendar clock and alarm window.
2.Press [ALARM] and the
indicator will be display to indicate
you are in the alarm mode.
3.Press and hold [SET] till the hour digit flash.
4.Use [
] and [
] to change to the desired setting.
5.Press [SET] for minutes setting.
6.Use [
] and [
] to change to the desired setting.
7.Press [SET] to confirm.
Note:
the window will show “
” if no alarm is armed.
Once set, the alarm clock will be activated automatically and the
alarm indicator
will light up. When an alarm goes off, press any
button to stop it. The alarm is still active and will go off again the
next day.
To deactivate the function,
1.Press the RF calendar clock and alarm window.
2.Press [ALARM ON/OFF]. The alarm indicator
will disappear.
ABOUT RADIO CONTROLLED CLOCK RECEPTION
Whenever the
WMR928NX
is brought within range of the radio
signal with its radio reception function activated, it will search for
the clock signal at a predefined time on each day while the manual
calendar clock settings will be overridden.
While receiving the signal the radio reception indicator will blink.
A complete reception generally takes
2
to 10 minutes, depending
on the strength of the radio signal.
The indicator will stop blinking when the reception is complete.
The status of reception will be shown:
To disable the radio reception function:
1.Press the RF calendar clock and alarm window.
2.Press and hold [
] to disable the function. The radio reception
indicator will disappear.
To enable the function again,
1.Press the RF calendar clock and alarm window.
2.Press and hold [
] to enable the function. The radio reception
indicator will blink.
WEATHER FORECAST
The weather forecast is displayed in the weather forecast and
barometric reading window.
There are four readings for the forecast: sunny, slightly cloudy,
cloudy and rainy.
- Strong
- Weak
- No signal
- Receiving
Forecast
Sunny
Slightly Cloudy
Cloudy
Rainy
Indicator
displays on
the unit
