12
EN
TRANSMISSION SIGNAL
The heart rate chest belt and watch have a maximum transmission
range of about 62.5 centimetres (25 inches). They are equipped
with the latest digital coding system to reduce signal interference
from the environment, as well as analog technology. For more
accurate readings use the digital transmission signal. You should
only switch to the analog transmission signal if the situation in
point 2 occurs (see below). Your watch will advise you which
system it is using and the signal status by displaying the following
icons:
If the heart icon does not appear on the display or
is not flashing because no signal has been found, force a signal
search. See "Signal Search" section for how to do this.
In the event that you experience a weak signal or your signal is
disrupted by interference in the environment, follow the instructions
below to identify and resolve the situation.
1. The signal is weak - the watch heart rate monitor will only
show "0":
•
Shorten the distance between the heart rate chest belt and
watch.
•
Re-adjust the position of the heart rate chest belt.
•
Check the conductive pads are moist enough to ensure solid
contact.
•
Check the batteries. If they are low or exhausted, the range
may be less.
•
Force a signal search (see "Signal Search" section).
IMPORTANT
ICON
DESCRIPTION
Outside heart is flashing Searching for a signal
Inside heart is flashing
A signal has been found and
the digital system is being
used
Heart is flashing
A signal has been found and
the analog system is being
used
No signal has been found
No signal has been found
SE211 English R3 OP
8/28/04, 3:49 PM
12
Black
All manuals and user guides at all-guides.com
