8
GB
BEEP ALARM
To
activate / deactivate
the alarm, press
[ALARM ON/OFF ]
when
the main unit is in Alarm display
mode.
When Beep Alarm goes off the EL backlight and projection will
activate for 5 seconds. Press any key to silence the alarm.
When
[SNOOZE/LIGHT]
is pressed to stop the alarm sound (only
when Beep Alarm mode is selected), the
alarm will go off
again
after 8 minutes. To disable the snooze function, press
[ALARM]
or
[ALARM ON/OFF ]
or press and hold
[SNOOZE/LIGHT]
for
3 seconds when alarm goes off.
Please note that the Radio, if active, will be temporarily interrupted
until the Beep Alarm is turned off.
RADIO ALARM
When the Radio Alarm is turned on, the Radio will be turned on for
2 hours. You can intervene by setting the time period for the Sleep
function by
using
[SLEEP]
or simply turn off the radio at any time.
HOURLY CHIME FUNCTION
When the hourly chime function is on, “
” will be displayed
and a beep
will sound
at the beginning of each hour. You can activate
or deactivate
this function in
the clock and calendar setting mode
(please refer to Section “SETTING THE CLOCK AND
CALENDAR MANUALLY”).
Section II - Digitally-tuned PLL AM/FM
Radio
HOW TO USE THE RADIO
All radio functions can only be operated when
the Radio is on.
To turn on the radio press
[RADIO].
The radio will
return to
the
last preset radio station and volume.
Press
[AM/FM]
to select the radio band.
Use
[+TUNING -]
to locate
the desired radio frequency. Press once and the value will advance
by 1 step. Press and hold for 2 seconds to enter the Radio Channel
auto-search function.
Use
[VOL +]
or
[VOL -]
to increase or decrease the volume.There
are a total of 16 (0-15) - steps.
To toggle among the programmed stations, press
[STATION]
.
To turn off the radio, press
[ RADIO ]
.
AUTO-SEARCH FUNCTION
The unit is equipped with an Auto-Search function and can
automatically search for the next clear channel. To activate this
function, press and hold
[+TUNING -]
for 2
seconds.
The value of
the frequency will keep increasing or decreasing until a clear channel
is found. Once
Auto-Search
is activated, you can release and stop
pressing the button.
RRM968PM_EN_R03
8/23/04, 10:40 AM
8
