E
N
6
• MSF-60 generated from Rugby, England
The clock collects the radio signals whenever it is
within 1500 km (932 miles) of a signal.
NOTE
Slide the
EU / UK
switch to appropriate position
for your location. Repeat each time you reset the unit.
NOTE
Initial reception takes 2-10 minutes for first set up
or when
RESET
is pressed. Once complete, the reception
icon will stop blinking. If the signal is weak, it can take up
to 24 hours to get a valid signal.
RECEPTION SIGNAL
STRONG
WEAK NO SIGNAL
To enable and force a signal search:
Press and hold
for 2 seconds.
To disable the signal reception:
Press and hold
for 2 seconds.
SET CLOCK
If the clock signal reception is enabled and a signal is
being received the clock does not need to be manually
set.
will occur to the unit due to low temperatures).
SENSOR DATA TRANSMISSION
The reception icon in the outdoor temperature area
shows the status.
ICON
DESCRIPTION
Main unit is searching for the
sensor(s)
A channel has been found and
sensor signal is being received
The sensor cannot be found.
Search for the sensor or check
batteries
To search for a sensor:
Simultaneously, press and hold
MEM
and
CHANNEL
for 2 seconds.
NOTE
If the sensor is still not found, check the
batteries, obstructions, and remote unit location.
CLOCK
CLOCK RECEPTION
This product is designed to synchronize its date and time
automatically once it is within range of a radio signal:
• DCF-77 generated from Frankfurt, Germany for
Central Europe
and “- -.-”(Outdoor
temperature area)
RMR682_M_EN_R4.indd 6
6/5/06 4:07:14 PM
