EN
10
To force a manual search for Atomic Clock signals, press
and hold
UP
for 2 seconds. If no signal is found, check
the batteries.
TURN ATOMIC CLOCK ON/OFF
Perform this step if you cannot receive Atomic Clock
signals. Press and hold
ZONE
(located in the battery
compartment) for 2 seconds. Then, manually set the
clock following the “Set Clock” instructions (below).
SET CLOCK
You only need to do this if you have disabled the Atomic
Clock feature (for example, if you are too far from or
cannot receive a signal).
1.
Open the battery compartment.
2.
Press
ZONE repeatedly
to display the desired Time
Zone: (P) Pacific, (M) Mountain, (C) Central, or
(E) Eastern.
The signal icon indicates that the Atomic Clock
feature is ON. No icon means that it is OFF
3.
Close the battery compartment.
4.
Press and hold
MODE
for 2 seconds. The Clock
Area will blink.
5.
Select the hour, minute, year, month, day and
language. Press
UP
or
DOWN
to change the
setting. Press
MODE
to confirm.
The language options are (E) English,
(F) French, and (S) Spanish.
SWITCH CLOCK DISPLAY
Press
MODE
to toggle between Clock with Seconds,
Clock with Weekday, and Calendar display.
ALARM
This product is equipped with a 2-minute crescendo alarm
and 8-minute snooze.
VIEW ALARM SETTINGS
Press
((.))
. The Alarm Time and On/Off status will show
in the Clock Area.
NOTE
RMR606HGPA_R5
9/3/04, 4:16 PM
10
