EN
11
NOTE
SET ALARM
1.
Press
((.))
.
2.
Press and hold
((.))
again for 2 seconds. The Alarm
settings will blink.
3.
Select the hour and minute. Press
UP
or
DOWN
to
change settings. Press
((.))
to confirm.
ACTIVATE ALARM
Press
((.))
to activate or deactivate the Alarm.
shows
in the Clock Area when the Alarm is activated.
SNOOZE ALARM
Press
SNOOZE/LIGHT
to silence the Alarm for
8 minutes.
If no button is pressed, the Alarm will automatically
silence after 2 minutes. It will then sound again after
8 minutes.
TEMPERATURE AND HUMIDITY
This product can display the following temperature and
humidity information:
•
Current, minimum and maximum readings
•
Trend line
Data is collected by the remote sensors and displayed
every 40 seconds.
SELECT TEMPERATURE UNIT
Slide the
°
C /
°
F switch into the desired location. The
switch is located in the battery compartment. The setting
for the main unit overrides the remote sensor setting.
SELECT SENSOR CHANNEL
Press
CHANNEL
to switch between sensors 1 - 3.
The icon shows the selected sensor.
To auto-scan between sensors, press and hold
CHANNEL
for 2 seconds. Each sensor's data will be
displayed for 3 seconds. To end auto-scan, press
CHANNEL
or
MEM
.
If you use a sensor that collects only
temperature data, humidity will not be shown.
Indoor
Display
Display
Remote
Display
Channel 1
Kinetic-
wave
Icon
Remote
Display
Channel 2
Remote
Display
Channel 3
RMR606HGPA_R5
9/3/04, 4:16 PM
11
