EN
1. Connect one end of the telephone line cord to the LINE jack on the bottom of the wall base unit.
2. Connect the other end of the telephone line cord to a telephone jack on the wall.
3. Raise the antenna on the base.
1. Plug the wall base unit into an electrical outlet.
2. Make sure that its pins are inserted fully into the outlet and it is firmly installed. If not, choose
another electrical outlet to plug into.
NOTE:
The handset battery and battery compartment cover are packaged together.
1. Connect the battery cord into the jack inside the handset battery compartment and then insert
the battery pack.
NOTE:
It is important to maintain the polarity (black and red wires) to the jack inside the
compartment as shown in the illustration. For this purpose and your convience the
battery plug and jack are keyed so they will only mate in one direction.
2. Close the battery compartment by pushing the cover up until it snaps into place.
page
Connect to any other phone
CONNECTING THE TELEPHONE LINE
CONNECTING THE AC (ELECTRICAL) POWER
INSTALLING THE HANDSET BATTERY
6
RED
WIRE
PRESS DOWN
FIRMLY
CHARGE FOR 12 HOURS
CONNECT BATTERY AND
INSTALL COVER
PRIOR TO USE
BLACK WIRE
BATTERY
os6976-en1.p65
5/20/2005, 12:09 PM
9
Summary of Contents for OS6976
Page 46: ......
Page 94: ......
Page 95: ......
Page 96: ...2005 Oregon Scientific All rights reserved 086 003759 017 os6976 en1 p65 5 20 2005 12 09 PM 46...