Oregon Scientific OS6976, User Manual

Page: 4 / 96

EN
Some of the following information may
not apply to your particular product;
however, when using Conference Phone
equipment, basic safety precautions
should always be followed to reduce the
risk of fire, electric shock and injury to
persons, including the following:
1. Read and understand all instructions.
2. Follow all warnings and instructions
marked on the product.
3. Unplug this product from the wall
outlet before cleaning. Do not use
liquid cleaners or aerosol cleaners. Use
a damp cloth for cleaning.
4. This product should not be used while
you are in a bathtub, shower or pool.
Immersion of the product in water
could cause an electrical shock.
5. Slots and openings in the cabinet back
or bottom are provided for ventilation,
to protect it from overheating. These
openings must not be blocked or
covered. The openings should never be
blocked by placing the product on the
bed, sofa, rug, or other similar surface.
This product should not be placed in a
built-in installation unless proper
ventilation is provided.
6. This product should be operated only
from the type of power source indi-
cated on the marking label. If you are
not sure of the type of power supply
to your home, consult your dealer or
local power company.
7. Do not allow anything to rest on the
power cord. Do not locate this product
where the cord will be abused by
persons walking on it.
IMPORTANT SAFETY
INSTRUCTIONS
8. Do not overload wall outlets and
extension cords as this can result in the
risk of fire or electric shock.
9. Never push objects of any kind into this
product through cabinet slots as they
may touch dangerous voltage points
or short out parts that could result in a
risk of fire or electric shock. Never spill
liquid of any kind on the product.
10. To reduce the risk of electric shock, do
not disassemble this product, but take
it to a qualified serviceman when
service or repair work is required.
Opening or removing covers may ex-
pose you to dangerous voltages or
other risks. Incorrect reassembly can
cause electric shock when the tele
phone equipment is subsequently
used.
11. Do not expose the product to extreme
temperatures such as areas near a hot
radiator or stove or in a hot car.
12.Do not place lighted candles, cigarettes,
cigars, etc., on the telephone.
13.Never touch uninsulated telephone
wires or terminals unless the tele
phone line has been disconnected at
the net work interface.
14.Never install or modify telephone
wiring during a lightning storm.
15.Never install telephone jacks in wet
locations unless the jack is specifically
designed for wet locations.
16. Use caution when installing or modi-
fying telephone lines to prevent
electrical shock and/or fire.
17. Unplug this product from the wall
outlet and refer servicing to qualified
service personnel under the following
conditions:
1
os6976-en1.p65 5/20/2005, 12:09 PM 4